English
Specificaties
-
Static cooling ceiling system SKS-4/3, voor verdekte installatie
High-capacity elements for installation above open, suspended ceilings; suitable for cooling all room types and applications but also usable for heating.
- Nominal length: 1 000 mm – 4 000 mm
- Nominal width: 350 mm – 1 475 mm
- Nominal height: 85 mm
- Pipe spacing: 125 mm
- Connection type:
- push-in fitting, press-fitted connection or solder end
- Installation height: ≥ 185 mm
- Surface finish: powder coating to RAL (standard RAL 9005)
-
Categorie
Klimaatplafonds - Koel- en verwarmingssystemen
Omschrijving
- Standard cooling capacity 175 W/m² of cooling element suspended false ceiling (to DIN 4715)
- Suitable for high cooling capacities, as required in offices with high heat loads, television studios, technical rooms, or in the industrial sector
- Uses the retention capacity of the concrete ceiling
- Low temperature differences in the occupied zone
- Combinable with any air distribution system
- Cooling elements are independent of the false ceiling, so that mechanical installations can be carried out largely separately from ceiling construction
- Low installation height saves on building costs and makes this systems particularly suitable for renovation and refitting
- The basic element is copper serpentine pipework in one piece, thus no special requirements for chilled water quality; low system costs, long lifetime, assured quality, operating pressure up to 16 bar
- Good dynamic response
- No combustible components
Downloads
E2.1.1.1_SKS-4-3_Static cooling ceiling system
Productfoto’s
